The company OKI Printing Solutions is a pioneer in led printing and has established itself as a manufacturer of reliable printers and multifunction devices. However, the lineup is as led and laser printers, but the last few less.

In this time we have tested single-pass OKI MC360 MFP based printer with led printing technology. The model is designed to work in small working groups, because the printing speed for home use excessively high: 20 pages per minute in monochrome and 16 in colour. The main difference of this model from Junior, MC350, – the presence of the Fax.

The technical characteristics declared by the manufacturer

OKI MC360
Print
Time to first page 10 mono 12 color
Warm-up time No more than 60 seconds
Processor speed 266 MHz
Print resolution 1200x600dpi and technology ProQ2400 multi-level illumination
The languages Host-based printing system
The format of the sheets Tray 1: A4, A5, B5, A6; Multipurpose tray: A4, A5, B5, A6, Labels (Avery 7162, 7664, 7666), Custom sizes: up to 215×1200 mm; ADF: A4, A5, B5, A6
Paper weight Tray 1: 64-120 g/m
Multi-purpose: 75-203 gr/sqm
ADF: supports 60-105 g/m
Exit 150 sheets face down, 1 sheet face up
Scanner
Scan resolution Up to 4800 dpi
Filing of documents The document processor 50-sheet (ADF), flatbed scanner
Address book LDAP, 100 email addresses, 20 FTP or CIFS address
Scan FTP, USB Flash memory, email, TWAIN, CIFS
Format sohraneniya the images PDF, TIFF, JPEG
Copier
The first copy out 17 with mono, 23 with the color
Copy speed Up to 16 ppm mono and 6 ppm colour
Copy resolution Up to 600x600dpi
Scaling 25-400%
The maximum number of copies 99 copies
Fax
Speed dial 100 rooms
Speed ITU-T G3(Super G3) 33.6 kbps/CE, 3 seconds per page
Fax memory 4MB (approximately 200 pages for sending and receiving)
Interfaces Hi-Speed USB 2.0
RJ11 x 2 (line and phone)
10/100 Base-TX Ethernet
General characteristics
Dimensions (WxHxD) mm 521x447x547
Weight, kg 29
Noise In operation: 53 dB(A)
Expectation: to 39 dB(A)
Supported OS Windows 2000 / 2003 x64 / XP Home / XP Professional / XP Professional x64 / Server 2003 / Server 2008 / Server 2008 x64 / Vista / Vista x64; Mac OS X 10.3.0 – 10.5.6 (print only)

The package

Supplied to us for testing was only a starter set of consumables, CD with drivers, manual and power cable. In addition to drivers DVD contains a fairly extensive set of various software. Unfortunately, the complex installation of all software at once is not provided, so each package has to be installed separately from the autorun menu of the disk. Unlike recently visited the test model, OKI MC160n, the tested model IFI is already fully supported in Windows 7, as a printer and Fax with a scanner, the latter for access using the protocols and WIA and TWAIN.

Appearance

The model focused on the use of small working groups, where the usual rather cumbersome device. However, the test MFP OKI MC360 relatively small and it is possible to find a place on the desktop, but do not forget about the considerable weight of the device is still 29 kg not each table will hold.

The device is made of plastic panels in two colors – grey and white. All panels are unpainted, rough surface, therefore, the case is absolutely not easily soiled, and can scratch the plastic very difficult. No gloss, which is very practical and build quality raises no objections. In General, the device is reliable and inspires confidence.

The front side is a folding tray envelopes with the ability to adjust the size of the install media, and at the bottom of the main tray, allowing you to install media in various formats (from B5 to Legal 14″) and can accommodate up to 250 sheets.

In the upper block is the front connector USB flash drives, and control panel with a small monochrome graphic display with blue backlight. A separate output tray no, its tasks performs the top panel of the printer unit, which holds up to 150 sheets, which is not too much for the MFP, based on work in groups.

At the bottom of the back panel connectors power connections (PSU is integrated into the housing), USB port (type B-F), network RJ-45 connector, a pair of RJ-11 connectors, designed to connect to a telephone line and telephone. There is also a vent grille and the door that hides the transport of the sheets.

Open the latest account only in the event of a jam of sheets that the testing process did not happen. In addition, when printing with an open rear access door sheets are on it.

On top of the scanner cover module installed, the automatic feeding of documents.

On the left is the power switch and the notch-stick, and the right – and is only a notch-stick.

Source: 3dnews.ru

Leave comment

Your email address will not be published. Required fields are marked with *.